- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Ingersoll Cutting Tools
845 S. Lyford Road
Rockford, IL 61108
Phone: 815- 387-6600
Fax: 815-387-6337
Recent Content on Canadian Metalworking for Ingersoll Cutting Tools
Inserts and holders enable all-directional and high-feed turning
- Feb 21, 2024
- Cutting Tools
- Product Release
Ingersoll has expanded its line of multidirectional, high-feed turning tools by introducing WinTurn.
Ingersoll’s NanoFeed indexable inserts designed for hi-feed milling of small parts
- Apr 19, 2022
- Cutting Tools
- Product Release
The 20-degree hi-feed indexable insert is designed to replace smaller diameter solid carbide end mills in many applications.
Ingersoll's NuMaxHF high-feed, steep-ramping inserts offered in two styles
- Nov 15, 2021
- Cutting Tools
- Product Release
The thick, diamond-shaped, tangential insert has a large inboard angle that enables high feed rates and steep ramping angles to be used.
Ingersoll CeraSFeed ceramic high-feed milling tool rough-cuts HRSAs
- Aug 31, 2021
- Cutting Tools
- Product Release
The line includes two double-sided indexable insert styles: LNXF09 and TNXN12.
Ingersoll's CeraSFeed ceramic indexable high-feed cutter performs extreme roughing of HRSA materials
- Jul 6, 2021
- Cutting Tools
- Product Release
Ingersoll has introduced its CeraSFeed ceramic indexable high-feed line for extreme roughing when milling HRSA materials. The line features two double-sided indexable insert styles: LNXF09 and TNXN12. LNXF09 offers a 1.5 mm depth of cut and 4 cutting edges. TNXN12 offers a 2.5 mm depth of cut and...
Ingersoll's SuperTurnZ uses the front and back cutting edge for multi-directional turning
- Apr 16, 2021
- Cutting Tools
- Product Release
Ingersoll Cutting Tools has introduced the SuperTurnZ family for multi-directional turning. This system uses the front and back cutting edge of a 4-corner insert in a single tool. In conventional turning 80- and 35-degree corner inserts are fed in the same direction, whereas this system uses all...
Ingersoll’s TwistSFeed drill features a new IN2205 coating designed for steel and cast iron applications
- Mar 11, 2021
- Cutting Tools
- Product Release
Ingersoll’s TwistSFeed drill family features a 3-flute quick-change tip with an upgraded clamping mechanism and utilizes a self-centering point. The drill features a new IN2205 coating designed for steel and cast iron applications. The clamping mechanism allows for the simple replacement of...
Ingersoll to host 3D printing webinar
- Aug 19, 2020
- Metalworking
- News Release
Ingersoll has announced plans to host a webinar titled “Can we 3D-print this instead?” on Sept. 23, 2020, at 10:00 a.m. ET. Through a number of case studies and design examples, this presentation will analyze what makes a project suitable for large-format printing. Focusing on reinforced...
Large-diameter parting off
- By Lindsay Luminoso
- May 13, 2019
- Cutting Tools
- Article
Insert selection, chip evacuation, and coolant are just a few factors that operators should pay attention to when parting off large diameter parts.
Products/Services
- Tools and Accessories – MachiningBoring Tools and Systems
- Tools and Accessories – MachiningDrilling and Tapping Tools
- Tools and Accessories – MachiningInserts
- Tools and Accessories – MachiningMilling Tools
- Tools and Accessories – MachiningTool Holders