Schunk will display the Vero-S NSL600 modular, quick-change pallet system. This system is suited for general milling applications as a basis for the quick setup of clamping devices. It allows for parallel setup during processing times outside of the machine. Numerous workpieces, clamping devices,...
SCHUNK introduces the 6-jaw ROTA NCR with standard chuck diameters ranging all the way from Ø165 to Ø1200mm, for large workpieces. The 6-jaw NCR chuck includes 3 pairs of radially compensating jaws which more equally distribute the chuck clamp force about the circumference of the workpiece, with...
SCHUNK has announced the newest generation gripper, PGN-Plus-P. Enlarged supporting dimensions between the six load-bearing shoulders of the multi-tooth guidance allow higher moment capacity which can accommodated longer fingers and greater loads. Permanent lubrication is provided through...
The KONTEC KSK 5A from manufacturer Schunk is a completely encapsulated, five-axis, centric clamping device.
The device’s closed design helps to ensure functionality and process reliability even in a rough environment. Malfunctions caused by soiling and clamped chips are eliminated.
It...
The ROTA NCS from SCHUNK is a sealed, three-jaw power chuck that applies high clamping force with an active pull-down effect. This creates a two-plane holding technique, which can produce an axial runout accuracy of less than 0.01 mm, according to the company. At the same time, the integrated,...
Schunk Inc. has redesigned its Tendo brand of toolholders to be able to clamp different types of cutting tools with cylindrical shanks directly in the toolholder without using intermediate sleeves.
The company has also increased torque transmission capacity by up to 15 percent.
The...
